Brushes and Tools 6.4mm to 25.4mm
Brushes for Internally Enhanced Tubes
The "Patriot®" Dual Diameter Nylon Brush
The "Patriot" Dual Diameter Nylon Brush is recommended for removing soft deposits (mud, algae, etc.) in straight, ferrous and nonferrous internally enhanced tubes. The large diameter end of this brush cleans into the grooves while its small diameter end cleans the lands of the tube's rifling.
Click Here to Enquire about this product.
ENN-090-Q The "Patriot" Dual Diameter Nylon Brush for tubes 23.8mm I.D.
Dual Diameter Spin-Grit Brushes
The Dual Diameter Spin-Grit Brushes are recommended for removing soft and light scale deposits in straight, ferrous and nonferrous internally enhanced tubes. The small diameter end of this brush cleans into the grooves while the large diameter end cleans the lands of the tubes rifling.
Click Here to Enquire about this product.
ESGB-Q-062 Dual Diameter Spin-Grit Brush for tubes 15.9mm I.D.
ESGB-Q-075 Dual Diameter Spin-Grit Brush for tubes 19.1mm I.D.
ESGB-Q-100 Dual Diameter Spin-Grit Brush for tubes 25.4mm I.D.
Brushes for Smooth Bore Tubes
Blue Nylon Brushes
Blue Nylon Brushes are recommended for removing soft deposits (mud, algae, etc.) in straight ferrous and nonferrous tubes. Brush should be equal to or 1.6mm smaller than tube I.D.
Click Here to Enquire about this product.
Spin-Grit Brushes
Spin-Grit Brushes are recommended for removing soft and light scale deposits in straight, ferrous and nonferrous internally enhanced tubes.
SGB-Q-075 Spin-Grit Brush for tubes 11.1 to 15.9mm I.D.
SGB-Q-100 Spin-Grit Brush for tubes 17.5 to 19.1mm I.D.
SGB-Q-125 Spin-Grit Brush for tubes 20.6 to 25.4mm I.D.
Bi-Fill Brushes
Bi-Fill Brushes are recommended for removing soft and light scale deposits in straight, ferrous and nonferrous tubes. The dual nylon and brass filaments help extend the life of the brush. Brush should be equal to or 1.6mm smaller than tube I.D.
Click Here to Enquire about this product.
Brass Brushes
Brass Brushes are recommended for removing soft and light scale deposits in straight, ferrous and nonferrous tubes. Brush should be equal to or 1.6mm smaller than tube I.D.
Click Here to Enquire about this product.
Stainless Steel Brushes
Stainless Steel Brushes are recommended for removing soft and light scale deposits in straight, ferrous tubes. Brush should be equal to or 1.6mm smaller than tube I.D.
Click Here to Enquire about this product.
Buffing Tools
Stainless Steel Wire Buffing Tools are used for removing light to medium scale deposits or for finishing tubes previously "roughed out" with other cleaning tools. They can be used in straight, ferrous and nonferrous tubes. Buffing tools can only be used in a clockwise (forward) direction and cannot be used in internally enhanced tubes. They are adjustable to a 6.4mm range.
Click Here to Enquire about this product.
GTC-203DT Same as GTC-203 with drill tip
GTC-204Q Buffing Tool for tubes 9.5mm to 12.7mm I.D
GTC-204QDT Same as GTC-204Q with drill tip
GTC-205Q Buffing Tool for tubes 12.7 to 14.3mm I.D
GTC-205QDT Same as GTC-205Q with drill tip
GTC-206Q Buffing Tool for tubes 12.7 to 14.3mm I.D
GTC-206QDT Same as GTC-206Q with drill tip
GTC-207 Replacement Metal Blades for GTC-203 and GTC-204
GTC-208A Replacement Metal Blades for GTC-205
GTC-208B Replacement Metal Blades for GTC-206
GTC-209 Adjusting Jig for GTC-203 and GTC-204
Wheel Brush Assemblies
Straight Tube Wheel Brush Assemblies
Recommended for removing soft and light scale deposits in straight, ferrous tubes. Each assembly consists of four stainless steel wire brushes attached to a universal joint. Brushes should 3.2 to 6.4mm smaller than tube I.D.
Click Here to Enquire about this product.
| Straight Tube I.D. | Wheel Brush Assembly | Actual Brush O.D. | Replacement Brushes |
|---|---|---|---|
| 29 to 32mm | WBS-100 | 25.4mm | WBR-100 |
| 35 to 38mm | WBS-125 | 32mm | WBR-125 |
| 41 to 44mm | WBS-150 | 38mm | WBR-150 |
| 48 to 51mm | WBS-175 | 44mm | WBR-175 |
| 54 to 57mm | WBS-200 | 51mm | WBR-200 |
| 60 to 64mm | WBS-225 | 57mm | WBR-225 |
| 67 to 70mm | WBS-250 | 64mm | WBR-250 |
| 73 to 76mm | WBS-275 | 70mm | WBR-275 |
| 79 to 83mm | WBS-300 | 76mm | WBR-300 |
Curved Tube Wheel Brush Assemblies
Recommended for removing soft and light scale deposits in curved, ferrous tubes. Each assembly consists of a single stainless steel wire wheel brush attached to each end of a universal joint. Brushes should be 6.4 to 9.5mm smaller than tube I.D.
Click Here to Enquire about this product.
| Straight Tube I.D. | Wheel Brush Assembly | Actual Brush O.D. | Replacement Brushes |
|---|---|---|---|
| 32 to 35mm | WBC-100* | 25.4mm | WBR-100 |
| 38 to 41mm | WBC-125* | 32mm | WBR-125 |
| 44 to 48mm | WBC-150* | 38mm | WBR-150 |
| 51 to 54mm | WBC-175 | 44mm | WBR-175 |
| 57 to 60mm | WBC-200 | 51mm | WBR-200 |
| 64 to 67mm | WBC-225 | 57mm | WBR-225 |
| 70 to 73mm | WBC-250 | 64mm | WBR-250 |
| 76 to 79mm | WBC-275 | 70mm | WBR-275 |
| 83 to 89mm | WBC-300 | 76mm | WBR-300 |
Cone Cutter Assemblies
Cone Cutter Assemblies are designed for removing scale deposits from straight and curved, ferrous tubes. Assemblies should be slightly smaller than tube I.D. The innovative design of the cones ensures a thorough cleaning. In watertube boilers, cone cutters are the most effective cleaning tools for all conditions.
Single & Double Cone Assemblies
Assemblies consisting of one or two cone elements are used for cleaning straight tubes 29 to 59mm I.D. and curved tubes 32 to 60mm I.D.
Click Here to Enquire about this product.
| Straight Tube I.D. | Curved Tube I.D. | Single Cone Assembly | Double Cone Assembly | Replacement Cones |
|---|---|---|---|---|
| 29 to 32mm | 32 to 35mm | SCA-100 | DCA-100 | RCO-100 |
| 33 to 35mm | 38 to 41mm | SCA-112 | WBR-112 | RCO-112 |
| 37 to 38mm | 44 to 48mm | SCA-125 | DCA-125 | RCO-125 |
| 40 to 44mm | 51 to 54mm | SCA-150 | WBR-150 | RCO-150 |
| 46 to 51mm | 57 to 60mm | SCA-175 | DCA-175 | RCO-175 |
| 52 to 59mm | • | SCA-200 | WBR-200 | RCO-200 |
Disc Cone Assemblies
Assemblies consisting of three cone elements are used for cleaning straight tubes 60 to 95mm I.D. and curved tubes 64 to 102mm I.D.
Click Here to Enquire about this product.
| Straight Tube I.D. | Curved Tube I.D. | Disc Cone Assembly | Replacement Cones |
|---|---|---|---|
| 60 to 71mm | 51 to 78mm | CDC-101 | RCO-100 |
| 73 to 84mm | 79 to 92mm | CDC-102 | RCO-100 |
| 86 to 95mm | 94 to 102mm | CDC-103 | RCO-112 |